HP DesignJet T610 Printer Repair

Code: 01.0:YZ

  • Description:Main PCA/Electronics module
    HCI queue does not end after 2 seconds.
  • Remedy:• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Formatted. • If the System Error continues, replace the Main PCA.

Code: 01.1:YZ

  • Description:Add-on Electronics module (printmech)
    NVM backup: not found, read, write or read back error.
  • Remedy:• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Main PCA. • If the System Error continues, replace the Formatter.

Code: 01.2:YZ

  • Description:Print Mech PCA
    Print Mech PCA fault or NVM backup failure.
  • Remedy:• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the PrintMech PCA.

Code: 02.1:YZ

  • Description:Carriage PCA
    Encoder seems to be wrong.
  • Remedy:• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected between the Main PCA and Carriage PCA. • If the System Error continues, replace the Trailing Cable.. • If the System Error continues, replace the Carriage PCA. • If the System Error continues, replace the Main PCA..

Code: 02.2:YZ

  • Description:Carriage PCA
    Problem with the Carriage PCA.
  • Remedy:• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected between the Main PCA and Carriage PCA. • If the System Error continues, replace the Trailing Cable• Page 8-88. • If the System Error continues, replace the Carriage PCA• • If the System Error continues, replace the Main PCA.. • If the System Error continues, replace the Formatted.

Code: 03:YZ

  • Description:Power supply
    Problem with Power Supply Unit.
  • Remedy:• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Perform the Electronics Module Test Diagnostic to troubleshoot the problem further. • If the System Error continues, replace the Power Supply Unit (PSU).

Code: 05.1:YZ

  • Description:Fan of the Formatter
    CPU Fan is stopped or burnt.
  • Remedy:• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Power Supply Unit (PSU). • If the System Error continues, replace the Main PCA.

Code: 06:YZ

  • Description:Formatter
    Main NVM failure – not detected, read/write failed or readback error.
  • Remedy:• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Formatted.

Call On Our Technical Support Phone Number For HP DesignJet T610 Printer Repair Services @ USA : 1-800-597-1052, Right Now to Get Instant Help.